copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
U. S. Environmental Protection Agency | US EPA This spreadsheet provides a standardized mechanism to input and archive verification data, calculate acceptance criteria, generate the verification summary sheet and automatically generate control charts
Transfer Standards for Calibration of Air Monitoring Analyzers for Ozone All O3 transfer standards must meet these verification requirements This document updates and replaces the 2013 document entitled “Transfer Standards for the Calibration of Ambient Air Monitoring Analyzers for Ozone”1 and the 1979 document entitled “Technical Assistance Document for the Calibration of Ambient Ozone Monitors”2
Ozone Standard Reference Photometer Program (SRP) | US EPA The Standard Reference Photometer Program is used to certify the State, Local, and Tribal monitoring organizations' ozone primary and transfer standards and is implemented through the Office of Research and Development (ORD)
Microsoft Word - APP_D validation template version 03_2017_for . . . - US EPA NOTE: This validation template attempts to provide the critical criteria, annual multipoint verifications calibrations, and verification calibration standards recertification frequencies and acceptable ranges for PM2 5 continuous FEMs and ARMs
TAD for Sampling and Analysis of Ozone Precursors for the PAMS Program . . . This scope includes guidance and technical information to State, Local, and Tribal (SLT) air monitoring agencies (henceforth referred to as “monitoring agencies”) as well as to Environmental Protection Agency (EPA) Regions responsible for measuring meteorological parameters and ozone precursors in ambient air
Transfer Standards For The Calibration of Ambient Air . . . - US EPA ------- Ozone Transfer Standard Guidance Document 10 2013 PREFACE Ultraviolet (UV) photometry is currently the most accepted technique for assaying ozone calibration atmospheres in the sub-ppm concentration range to obtain primary ozone standards
Ambient Air Monitoring Quality Assurance | US EPA As part of this framework, EPA establishes and periodically revises National Ambient Air Quality Standards (NAAQS) for the criteria pollutants, and the Agency has established requirements for monitoring networks for these pollutants
Updating the Absorption Cross-Section for Surface Ozone Measurements What is the Absorption Cross-Section for Surface Ozone Measurements? • The absorption cross-section (absorption coefficient, α) is a parameter used to determine atmospheric ozone concentrations based on the amount of light absorbed at an ultraviolet (UV) wavelength of 253 65 nm