copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
What would cause a CDI to pop - Blue Traxx Forum I tried putting this in another thread but it wasn't getting any hits I bought a 96 Warrior as a project I was told it had a bad CDI I went through the carb and got a new CDI I hooked it all up and got to crank it over a few times I then heard a buzzing sound like electronics burning up I
Cdi wiring help - Blue Traxx Forum My CDI box has 12 wires and I believe it is a 90-95 also my stator has 7 wires please any help is much appreciated a CDI box wiring diagram with wire description particularly would be awesome Thanks
cdi box test? | Blue Traxx Forum is there any way you can test the cdi box or the stator for a banshee i have a extra cdi and a stator but i dont know if they work,
Warrior 350 electrical cdi issues - Blue Traxx Forum After doing all this I realized the cdi is not the original one for the atv It is a no name one with one plug that matches the warrior but a few others that were cut and ran directly to the stator wires which also don't match a 88 stator wiring The atv did run before with the cdi and stator The issue I'm having is I have no clue which wires go where as I unhooked them and lost the list they
2001 warrior 350 no spark pick up or cdi??? | Blue Traxx Forum just purchased 2001 warrior 350 it wouldnt crank over at first found some wireing issues now i have no spark i tryied to ohm out pick up but dont seem to be getting correct readings from the pick up coil or the stator hard to believe that both bad what do you think replace cdi first or try
94 Warrior - stator wiring CDI pinout? - Blue Traxx Forum The orange wire out of CDI is still constant ground I don't know if this is being caused by A) the CDI itself or B) one of the inputs (clutch switch, neutral or ignition cutout relays?) to the CDI Is there a way to test the CDI itself? The pulse generator and pickup coil seemed to test within spec for Ohms