copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
Scanner Tales: Radio Shack Scanners; the good, the bad and the just . . . Of course they were all made by GRE by then Uniden made their last RS scanners around 2007 or 2008, after that all RS scanners were all GRE made While all major scanner companies (RS, Uniden Bearcat, GRE, Regency etc ) had good and bad radios, RadioShack seemed to have the ones at the far ends of the spectrum, good and bad
Radio Shack 20-047 Driver - RadioReference. com Forums Did the cable work before? When I rebuilt my Windows 10 computer all I did was plug the cable in and it automatically installed the driver and it works fine I have both the RadioShack 20-147 (Orange) and the GRE (Blue) cables and they both installed just fine without needing to download drivers
Pro-97 Display Problem - RadioReference. com Forums Ok folks, up for everyone's consideration is a blank Pro-97 display The scanner had been put on a shelf for around two months (while I was out of the country), with batteries removed It had not been touched by anyone I put batteries in and the display is blank upon power up It scans
Pro-82 (20-315) Comp Programing - RadioReference. com Forums I bought the programing wire for the pro-82 scanner but it will not show on my computer Serial Connector mono connector The guy at radioshack said it was the right one and the manual says i can program from my computer Any ideas?
Whistler and GRE RS USB Programming Cable DIY I had a Pro-97 and Pro-164 with the RadioShack 20-047 USB cable This worked fine for these radios I then bought a used Whistler 1065 to log P25 traffic The 20-047 worked fine for programming, but when I dumped trunking data from the scanner to the PC, it would lock up the cable and scanner after about 10 minutes of use
Where To Get Drivers For Windows 10 Pro - RadioReference. com Forums Hi Forum Members, Been out of scanning for about 10 years and want to get back into the hobby I have Pro-197 and the correct Radio Shack USB connection cable to use with ARC500 software I purchased a cheap used laptop with Windows 10 Pro because I know the scanning software requires Windows
PRO-106 Need software and or firmware update? Find the latest updates here RadioShack PRO-106 39,000-Channel Digital Handheld Scanner : Handheld Scanners | RadioShack com You should already have the programming cable, it should have been offered in a special deal when you bought the radio RadioShack USB-PC Scanner Programming Cable : Programming Cables | RadioShack com
for R Shack PRO-92 orig model - RadioReference. com Forums Good afternoon I have been looking for programming software that will work on Windows 10, for my older Radio Shack PR0-92, original, not A or B model, software ver 1 00 I ordered a Radio Shack GRE Whistler FTDI USB scanner programming cable, 20-546, which came with the additional, adapter
Radio Shack DX 398 Review and observations I've had several variations of the DX-398 ATS-909 I sent my 398 to RadioLabs for the Super 909 mods The mods are well worth the money, it fixed many 'nit-pick' things on the stock unit from elimination the tuning detent to better filters, better audio, better speaker, etc but the one thing that really perked up is sensitivity, the difference is like night and day
Scanner Tales: Radio Shack scanners “In the day” (and some GRE’s) I also had some of the RadioShack versions of them over the years I had acquired a half dozen PSR600 RS PRO197 652’s and used them mostly for running PRO96Com The PSR100, 200, 300, 310, 400, 410, 500 and 600’s and their RS clones were decent enough scanners, but I was much more comfortable with the Uniden methods of operations and