copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
Mirroring the Boot Pool | TrueNAS Documentation Hub Adding a second storage device to the boot pool changes the configuration to a Mirror This allows one of the devices to fail and the system still boots If one of the two devices were to fail, that device is easily detached and replaced When adding a second device to create a mirrored boot pool, consider these caveats: Capacity: The new device must have at least the same capacity as the
3 Drive Configuration | TrueNAS Community The drive prices for 16TB drives (specifically Exos) are pretty decent compared to 10TB I think, thus why I want 16TB Are there any downsides to a 3 way mirror? Would it allow two out of the three drives fail without incident? Also if you know any documentation on it that would help a lot Also with RAIDZ, adding drives to a pool later requires resilvering, does a mirror 3 way mirror require
Managing Pools | TrueNAS Documentation Hub Extend a ZFS mirror: Add the same number of drives The result is a striped mirror For example, if ten new drives are available, a mirror of two drives can be created initially, then extended by adding another mirror of two drives, and repeating three more times until all ten drives are added Extend a three-drive RAIDZ1: Add another three drives
SOLVED - Change stripe vdev layout to mirror - TrueNAS After confirming going from stripe to mirror was possible I went ahead and built my system with two storage pools An "main" pool with 2 x 8TB drives for bulk storage and a "fast" pool with SSD's At the time of building the "fast" pool I only had access to a single 750GB SSD Knowing that I could extend the pool later, I configured it as a stripe
Protecting bathroom mirror from corroding around the edges In my bathroom I have a beautiful illuminated LED mirror It's now 10 years since I originally installed it - and over time, the edges have become de-silvered as the backing coat has corroded and p
Replacing Disks | TrueNAS Documentation Hub Provides disk replacement instructions that take a failed disk offline and replaces a disk in an existing VDEV The replacement process automatically triggers a pool resilvers
Can I prevent my bathroom mirror from fogging up? My bathroom is not very large, and especially during winter, the mirror tends to fog up after the shower has been in use Is there something I can do to avoid the mirror fogging up? I seem to vaguely
Creating Pools | TrueNAS Documentation Hub The Pool Manager suggests a vdev layout from the number of disks added to the vdev For example, if two disks are added, TrueNAS automatically configures the vdev as a mirror, where the total available storage is the size of one added disk while the other disk provides redundancy
Different size drives question | TrueNAS Community Having such a wide Mirror vDev will be slower on writes But, theoretically faster on reads because ZFS should be able to queue up read requests to any sub-mirror