copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
Trouble with APEX FMM | Reef2Reef I recently updated my old Apex classic to the new in hopes of eventually getting a trident I also added a FMM as I wanted to add an extra layer of protection on my ATO with optical sensor and get a leak detector and flow sensors When it all works its great but I have been having the FMM
Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK) Let’s walk through each line: Fallback OFF — instructs the Apex to turn off this output if the Apex ever gets disconnected from the FMM This could also apply if the Apex locks up and becomes unresponsive (which rarely happens) This just basically means don’t run the program if the Apex unit isn’t in control of the situation
FMM disconnected | Reef2Reef My FMM is showing disconnected and the optical sensors are not responding to state changes thus my ATO is not currently working I have disconnected both USBs into my FMM so the light turns out, wait approximately 30 seconds and replug in The light is showing green but it is still showing disconnected on Fusion Any suggestions?
Neptune FMM module issues | Reef2Reef So I have the FMM module that cam with the ATK kit I have the two optical sensors that came with the ATK, One 15 inche LLS, and one Leak Detection Over the weekend this module would show as missing and not sure why Unplugging it reset everything and started working again Now the issue I
Apex Module Missing log? | Reef2Reef For the past two days one of my FMM modules has been losing connection and I wake up to a "Module Missing" alarm on the Apex 2016 So far simply rebooting the module has fixed it (although there is a flow sensor on this FMM and it does not always report the sensor after I reboot it) I wanted
Hooking up a third party float valve to Apex FMM and programming it. Okay, so my question is, I want to connect this third party float valve to the empty port on my FMM I tried calling Apex, and didn't get much clarity If I hook up this float valve that has a hot and ground to this male aux port, and plug it into my FMM, will the FMM know what to do with it
Apex controller FMM ports | Reef2Reef The FMM module is working, it’s the FMM ports on the apex controller Did you get an answer on this one, having the same issue with the Apex Pro (built-in FMM not showing up in fusion)
Trouble with the Neptune ATK, Error on ATK | Reef2Reef This happens if it takes longer than 5 minutes (the "When" timer value) to top off the water level Common causes include a dirty optical sensor, failed optical sensor, clogged or kinked water tubing, air trapped in the PMUP, failed PMUP, no power to the FMM power adapter, or failed FMM power adapter Follow the troubleshooting steps in my ATK tutorial to try to isolate the problem: