copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
Dakota Digital BIM Module Speed Reading How-To. Dakota Digital claims the BIM module will read a speed value from pin A12 in J1A when it's set accordingly This location corresponds to Input #1 on the Pin Map I repinned my VSS Output to this location, and set the BIM module up with "Inp" as "Spd" per the instructions
Terminator to Dakota Digital VHX gauges using BIM-01-2-HLLY I got everything to work on the dash from the Holley ECU except the speedometer I gave up and bought a Dakota Digital GPS module and hooked it up Everything works great now I've put almost 2K miles on it without any issues from the EFI or the dash I had a few engine transmission cooling issues early on, but I've got those sorted out now
Terminator X Max Dakota Digital Components Chuck or Andrew I have the Dakota Digital VHX, Dakota Digital BIM and CRC-2000 as well I've been contemplating the Terminator X Max, but I've been told the only way to get Dakota Digital cruise to work is to configure an output that has positive signal and 4,000 PPM
Dakota Digital BIM-01-02-HLLY CAN Bus Adapter I just heard that Dakota Digital released a new version of the BIM-01-2-HLLY, that's available with a Y-Connector that will allow it to work in parallel with the Sniper EFI 3 5" TSLCD This applies to BIM-01-2-HLLY produced after 2 18 2018 I have not verified this for myself, but understand it to be the case
Dakota Digital Oil Pressure - Holley Performance Products Forums UPDATE #1: Dakota Digital Tech support is asking that I swap pins A20 to A31 to make sure the BIM isn't pickup up the fuel pressure as the oil pressure input I don't think this is likely as the Bluetooth app doesn't report the fuel pressure changing like you would expect the oil pressure to change
Dakota Digital BIM-01-02-HLLY CAN Bus Adapter The problem I’m having is that the Holley EFI system wants me to wire my CD box directly to their system If I do this, my Dakota Digital tachometer will not work Both tech support from Dakota Digital Holley suggested the BIM-01-2-HLLY I have not installed the Holley interface yet, but I had intended to use the handheld
Holley Terminator X Max Dakota Digital CRC-2000 Cruise Control Module I have the Holley Terminator X Max controlling the L33 and 4L80E in my '65 Nova It's been tuned and is running well and driving great (thanks andrewb70!) I recently picked up the Dakota Digital CRC-2000 and I'm trying to get it to all work together I have the speedometer enabled and a VSS output setup for 4000 PPM through pin B12 in Holley
Dakota Digital RTX, Holley 7 12 Questions It displays some of the Holley parameters on the Dakota Digital dash, and the speedometer works as well from the ECM signal (Again, I have the transmission control version of the Holley EFI) Look at the instructions of the BIM, it'll tell you exactly how to setup the unit to work with the system
Terminator X Dakota Digital RTX Question I have a LSx swap running a Dakota Digital RTX dash with their BIM interface In their instructions they show setting the Terminator X to "Racepak" on a PC interface I'm not finding this option with the handheld What am I doing wrong? Thanks, spb