copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
late 60s Lamar 15 ft fiberglass boat built at Central Boat Works in . . . Re: late 60's Lamar 15 ft fiberglass boat built at Central Boat Works in Texas I doubt that there is anything rare about the hull certainly not from a value point of view Might post this in the Johnson Evinrude section And there is an excellent sticky thread about getting those old timers running
Anyone know anything about Dixie Boatworks? - iboats Boating Forums Re: Anyone know anything about Dixie Boatworks? The USCG Manufacturers Identification Code (MIC) database shows Dixie Boat Works has been acquired several times since 1990 and has produced boats with MIC's of DXE, BKW and MEL Find the HIN on the transom and try the first three digits in the MIC database and see what you get FYI, several forum members have posted questions about Dixie boats
FIXED ***boat wont start since putting in new battery, having brain . . . Re: boat wont start since putting in new battery, having brain fart help pls Re: boat wont start since putting in new battery, having brain fart help pls Those fuses don't "Come apart" Hook your battery cable back up to the starter solenoid, then hook a jumper between the starter solenoid and the wires that hooked to the fuse
Trim up doesnt work, but trailer switch does - iboats Boating Forums Re: Trim up doesn't work, but trailer switch does Do not clip anything! Go to the transom and look for two black wires coming from the transom plate (behind the engine) and going into two connectors, one with purple white wire and one with two blue white wires Those are the trim limit switch wires To test, unplug the black wires and take a short piece and jumper between the two connectors
boat speedometers? how do they work? - iboats Boating Forums Re: boat speedometers? how do they work? Thre is a "Pitot" or pickup either on the hull or the drive (Engine), it sends water pressure to the speedometer The amount of pressure varies with the speed, therefore it induces a corresponding speed to the gauge If its not working at all (Nothing idicated) there is usually a piece of line disconnected or in some cases, especially if it reads the
cleaning boat with toilet bowl cleaner - iboats Boating Forums I used toilet bowl cleaner ("It Works") to remove the dirt staining on my hull after leaving my boat in the river for a few days I found that spraying it on and letting it sit for a few minutes and then wiping off worked well I definitely recommend wearing gloves and long sleeves as the cleaner will for sure burn your skin upon contact
Mercruiser I O wont trim up, trailer works, help? Re: Mercruiser I O wont trim up, trailer works, help? that's a pretty classic symptom there's plenty of posts on here with troubleshooting techniques and manuals for this just search for em most likely a trim position or limit switch that has gone bad or wire broken corroded through does your trim position gauge read out? you can still use your trailer button to achieve your trim needs
Boat Wont Turn Over, No Click, Battery fully problem Re: Boat Won't Turn Over, No Click, Battery fully problem Try taking a jumper wire and run it from the pos cable on the solenoid to your B terminal on the solenoid and see what happens