copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
G4 Tacoma Bed Step Does the bed step for the G4 (PT392-35920) mount only on the driver or passenger or either side?
Tacoma Bed Specs and Dimensions Specifically for a 2016 Toyota Tacoma TRD Sport Access Cab Long Bed I believe the specs are close for the 5ft bed as well (width, height ect), given
Best bed covers - Tacoma World New Taco and am looking to start outfitting it What are some good hard cover bed covers? I am looking for something that will offer protection, but
Bed storage ideas - Tacoma World What do you have for bed storage solutions? Looking for ways to store recovery gear and other things without them sliding around Not interested in
Tacoma Bed removal Thanks everyone for the bed removal help, I started the removal and the four bolts toward the cab were fairly easy, but the two in the rear were nut and bolts which I had to cut with a grainder ,due to the notorious RUST With that said I purchased all new hardware from Toyota to replace all nuts ,bolts and washers Thanks again everyone
Bed Storage - Simple DIY - Tacoma World Figured I'd share a simple, effective, inexpensive, DIY solution I came up with and have been using for storing things in the bed of my gen3 DCLB
Tacoma Loose Bed design Flaw explanation If your bed is loose, remove bolt and see if metal sleeve is in line with floor of bed If it protrudes above the floor it means the composite block mount has eroded DO NOT GRIND IT FLAT WITH A GRINDER TO MATCH THE LEVEL OF THE FLOOR!!! You will cause misalignment of the bed The spacer is the height guide
Bed Step: Anyone use it? - Tacoma World I just picked up my Tacoma a few weeks ago and mine came with the optional bed step on the back It collapses under the bumper Does anyone actually
Bed Lights - Tacoma World OEM Bed Lights is the way to go! Since OP has a TRD, I would venture to say this "DOOR" switch is in the cabin The OEM Bed Lights are plug and play and are plenty bright