|
- Chain jumping every few crank rotations - Bicycles Stack Exchange
Chain "jumping" every few crank rotations Ask Question Asked 4 years, 9 months ago Modified 4 years, 9 months ago
- Diagnosis of a skipping jumping drive train problem
I have an old 1990s Kona Lava Dome 3x7 speed which has developed a nasty jump skip under load across a wide range all gears On inspection, the chain was past its 1% limit and the jockey wheels (or
- Chain skipping when pedaling hard - Bicycles Stack Exchange
Some weeks ago I started to have the problem that when applying a lot of power to the pedals, the chain was slipping (not jumping to another gear but just slipping) This was particularly problematic when pedaling in up hill or when starting from still position
- What is the purpose of whipping a bike? - Bicycles Stack Exchange
Once one becomes experienced in jumping and starts to reliably clear middle-sized jumps, simply doing them can become quite boring A medium-sized jump gives a couple to 5 seconds of flight time, which feels like a lot to the rider You simply hang in air doing nothing! Whipping is an easy, relatively safe and good-looking trick to learn at this point
- What makes a new chain jump other than a worn cassette?
Any chance you could get a video of the jumping happening? Also a picture of the cassette and chainring to evaluate wear would be nice What model chain was the old one and what's the new one?
- skipping - When I am pedaling harder on a slope, the chain sometimes . . .
1 This is an easy fix albeit I will caution you, what I refer to as 'chain jumping' is one of the more dangerous scenarios when riding a bicycle Each time it jumps, from pushing hard on the pedal, the worse it becomes For the moderator, my experience comes from building over 400 bicycles, 2 3 of these vintage mountain bike conversions to road
- Problem with chain skipping without trying to shift (even with new . . .
The problem is likely due not to anything from the chain or the cogs, but rather cable tension If the chain is trying to shift onto bigger (lower gear) cogs, then the cable is too tight The chain will keep trying to catch the next larger cog If it's too loose, it will try to shift to the next smaller cog (presuming a standard derailleur setup, some are "backwards") Try this Shift to the
- What effect does changing the stem length have on my bikes handling
14 I'm finding that when jumping my mountain bike seems to be very nose heavy no matter how far back my saddle is What effect will moving to a shorter stem length have? My bike, a Boardman FS-PRO came with a 100mm Richey stem
|
|
|