|
- 453 bobcat - Heavy Equipment Forums
I have a 453 bobcat with a hydro leak it would leak even with the machine off I got the engine and the hydro pump removed it looks like it is leaking at the bottom of the control valve someone told me it was the valve spools what is the best way to fix this if i take the whole valve
- Help operating a Hydro-Ax 670 | Heavy Equipment Forums
Blount (is or was, not sure if they sold) owns both Hydro AX and Prentice as well as a bunch of other logging equipment manufacturers RMS has been a distributor for many years
- Cat 304 ECR Hydo Advanced 10 cheaper alternatives and blade hose . . .
I read about TO-4 but as Far as I understand there is no transmission, right? it's just hydo oil, engine oil, and gear oil in final drives I want to replace these oils and hydro filters Any suggestions with details I will greatly appreciate
- CAT HYDO Hydraulic Oil Alternatives? - Heavy Equipment Forums
An SAE10W hydraulic oil from any reputable oil company (Mobil, Shell, Conco, etc) would be my suggestion They will all produce an oil of an equivalent specification to Cat HYDO 10W Mobil used to produce the oil for Cat, I'm not sure if they still do Look for any oil that passes the Eaton Vickers 35VQ25 Vane Pump test, that is a good guideline Beware of spec sheets that say "designed to
- Correct hydraulic fluid for international 3400A backhoe
Hello, I have a 1971 International backhoe The previous owner told me that it was a hydrostatic trans and the machine came with a hydro maintenance manual, but I do NOT believe that it has a hydro in it I have a speed selector for gears 1-4 and after removing the floor plate I can see a
- Problems with a Hydroax - Heavy Equipment Forums
Hey everyone I have a hydroax 621B had a total failure of both the hydraulic pumps both the big pumps and the smaller auxiliary pumps attached to them were rebuilt and i put the machine back to work in the month or so she has been back to work, I have blown a seal 4 times now between one of
- quick coupler spring pin hanging up. - Heavy Equipment Forums
GTL06038 cat 279D 2014 when i run the hydro for the quick coupler attach into the retract mode - one of the pins gets hung up and will not retract i think i have to tear it apart or perhaps replace the spring? any ideas of whats best before i start to break it down for parts? the pin does
- 84 F600 Hydro boost? - Heavy Equipment Forums
Hydro Boost Thank you for responding ATCO!Yes it's better defined as a firm -hard pedal The electric pump works when you first start the motor The brakes are all good no leaks in brake cyls
|
|
|