|
- Vectric Customer - Index page
Forum for users of Vectric products
- Changing safe z height - Talk ShopBot
In VCarve Pro v3 1, is there a way to change the safe z height after the material is defined? I have one particular tool path that might be trouble and I wanted to add a little height to the safe z but it’s not obvious to me if there is a way to do it Tom
- ArtCAM vs Aspire - Talk ShopBot
The guys at vectric worked for Delcam Delcam cost around $7500 + support Aspire is much easier to use and support is free Don 01-18-2014, 02:19 PM #3 phil_o Senior Member
- Can I open a TAP file in Aspire 9. 5? - Talk ShopBot
I just found this on the Vectric forum: You can optionally output a CSV file that in turn can be imported to Vcarve Aspire with Paul Rowntree's CSV importer, although it requires additional effort If you happen to have the Shopbot control software (with or without the machine), you can import and simulate g-code files directly
- Drag Knife Tutorial - Talk ShopBot
In the Vectric software that is a good idea I don't know of any other technique for checkingthis Typically, if you are creating the artwork to be used with the drag knife, you would consider this from the very beginning If you have traced an image or purchased your file, you will need to take the time to become familiar with the level of detail in the drawing This would be something you
- Fractions in Aspire VCarvePro
Forum Applications and Techniques Designing and Creating the sbp cutting file Aspire Fractions in Aspire VCarvePro
- Epoxy Volume Calculator - Page 2 - Vectric Customer
This gadget calculates the volume needed when creating epoxy inlays This is based on the spreadsheet created by Rob Sandstrom which he talks about on his Gener
- Anyone have any of these problems in v carve pro?
Forum Applications and Techniques Designing and Creating the sbp cutting file VCarvePro and PhotoVCarve Anyone have any of these problems in v carve pro?
|
|
|