|
- Uniform flow occurs when | Civil4M
Uniform flow occurs when (a) the direction and magnitude of the velocity at all points are identical (b) the velocity of successive fluid pai-ticles, at any point, is the same at suc¬cessive periods of time (c) the magnitude and direction of the velocity do not change from point to point
- Uniform flow occurs when | Civil4M
Uniform flow occurs when (a) the flow is steady (b) the flow is streamline (c) size and shape of the cross section in a particular length remain constant (d) size and cross section change uniform¬ly along length (e) flow occurs at constant fate The correct Answer Is (c) size and
- A one dimensional flow is one which - Civil4M
A one dimensional flow is one which (a) is uniform flow (b) is steady uniform flow (c) takes place in straight lines (d) involves zero transverse component of flow (e) takes place in one dimension The correct Answer Is (d) involves zero transverse component of flow
- To ensure uniform pressure distribution, the thickness of the . . .
To ensure uniform pressure distribution, the thickness of the foundation, is (A) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge The correct Answer Is (C) Decreased gradually towards the edge
- Work Procedure Specifications for Internal and External . . . - Civil4M
Wetting shall be uniform To avoid cracks at the junction of concrete with masonry work, the plaster shall be reinforced at such junctions by fixing standard wire mesh (6 x 6 x 6 6) as directed by the Engineer-In-Charge The wire mesh shall overlap concrete and masonry surface by at least 150mm
- Why we do PCC before footings? - Civil4M
In any construction project, after excavation, PCC is done before footing Why we do PCC at the base of footing, PCC have lower strength than concrete and it is placed at base?
- Checklist for all kinds of tiling works including grouting . . . - Civil4M
Uniform compaction with straight edge flat shovel has been ensured Floor Tiling Work Pre Execution Checks: Are all the required tools available at site? The surface on which tiles to be laid made moist, free from dust and other contaminations The plan setting out for tiling done All the tiles are of required dimensions
- Normal depth in open channel flow is the depth of flow corresponding to
Normal depth in open channel flow is the depth of flow corresponding to (a) steady flow (b) unsteady flow (c) laminar flow (d) uniform flow (e) critical flow The correct Answer Is (d) uniform flow
|
|
|