- ba_gb. fm - Instrumentation2000. com
The following sampling rates are possible: rAtE OFF, 10 ms, 100 ms, 1 s, 10 s, 60 s ↵ If OFF is selected, individual measurement values can be stored to memory by simultaneously activating the ESC|FUNC and ↵ keys
- HD2302 H - Senseca Germany GmbH
The CEI EN 60335-2-27 norm prescribes that, during the first tanning treatment, the dosage of 100 J m2 cannot be exceeded, and that the maximum yearly dosage must not exceed 15000 J m2 The typical spectral curve of the LP 471 ERY probe is illustrated in the figure together with the UV action curve: the agreement between the two curves mean reliable measurements are obtained using the
- EN ACS ACC ACP 601 Hardware Manual - ABB
ACS ACC ACP 601 Hardware Manual EN 61201360 2 2 to 110 kW Safety instructions
- cover - Yaesu
AC Input Voltage Selection (U S A Users only) Before moving the AC range switch, disconnect the FP-30’s AC Power Cable from the AC line outlet, then wait 10 minutes to allow the power supply’s electrolytic capacitors to discharge (electrical shock hazard!) Peel off the label on the side of the FP-30
- RX200 Series Microcontrollers Brochure
RX200 – A PERFECT BALANCE OF PERFORMANCE AND POWER CONSUMPTION The RX Family of MCUs features the revolutionary RX architecture and meets current and projected system design requirements in terms of memory size, power consumption, scalability, feature set, and price Devices in the RX200 Series emphasize mid-range performance combined with high power efficiency and ultra-low power, low
- GAL22V10 883 Data Sheet - University of Nebraska–Lincoln
As a result, Lat-tice Semiconductor delivers 100% field programmability and func-tionality of all GAL products In addition, 100 erase write cycles and data retention in excess of 20 years are specified
- TNY174-180 - media. digikey. com
The controller consists of an oscillator, enable circuit (sense and logic), current limit state machine, 5 85 V regulator, BYPASS MULTI-FUNCTION pin , overvoltage circuit, and current limit selection circuitry, over-temperature protection, current limit circuit, leading edge blanking, and a 650 V power MOSFET TinySwitch-LT incorpo- rates additional circuitry for auto-restart, adaptive
|