|
- FMM disconnected | Reef2Reef
My FMM is showing disconnected and the optical sensors are not responding to state changes thus my ATO is not currently working I have disconnected both USBs into my FMM so the light turns out, wait approximately 30 seconds and replug in The light is showing green but it is still showing disconnected on Fusion Any suggestions?
- Trouble with APEX FMM | Reef2Reef
I recently updated my old Apex classic to the new in hopes of eventually getting a trident I also added a FMM as I wanted to add an extra layer of protection on my ATO with optical sensor and get a leak detector and flow sensors When it all works its great but I have been having the FMM
- Apex controller FMM ports | Reef2Reef
Oh, I didn't realize the Apex 3 has built in FMM ports So it sounds like you went to the Modules screen and clicked on the FMM_X module and in the configure dropdown, selected Delete?
- Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK)
Let’s walk through each line: Fallback OFF — instructs the Apex to turn off this output if the Apex ever gets disconnected from the FMM This could also apply if the Apex locks up and becomes unresponsive (which rarely happens) This just basically means don’t run the program if the Apex unit isn’t in control of the situation
- Do You Have an Apex with an FMM? -- Please Read This
Saf1, The FMM's started resetting the ports from flow meters to optical switches 1 or 2 firmwares before 7C19 And these were ports configured manually Why they have an option for "Auto Detect" when it can't detect flow sensors is beyond me and they should grey that out until it actually works So it was taking manually configured Flow Sensors and switching them to optical sensors -- the 7C19
- Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK)
Part 3 of our series on learning how to program your Neptune Apex for automatic top-off in a saltwater aquarium
- Accessory ports on FMM | Reef2Reef
I added a small Neptune ATO type of pump to provide flow through a salinity stabilizer and plugged it into an accessory port on one of my FMM’s I expected a new tile to pop right up however such is not the case How do I find, add, configure this outlet? Thanks for any help!
- APEX FMM Configuration | Reef2Reef
Hello, I bought an Apex 3 second hand and I thought I had reset it to factory settings but I'm wondering now if there are still items showing that arent valid? I have one FMM module plugged in for my ATK with ports showing as ATOLO, ATOHI for the optical sensors and then the optical sensor
|
|
|