|
- Pentair Globrite replacement option - Trouble Free Pool
Hello My name is Justin and I Am a certified pool contractor down in Sarasota florida and also handle warranty work for several large companies (pentair and Hayward) It has come to my attention the pentair globrite lights have a huge failure rate The housings all crack in the same spot
- Pentair IntelliFlo Pumps - Further Reading - Trouble Free Pool
Pentair IntelliFlo Pumps IntelliFlo is Pentair's family of variable speed (VS) pumps that connect to Pentair Automation Systems using a RS-485 data communication cable When connected to an automation system the pump is controlled by the automation system and the display on the pump display "DISPLAY NOT ACTIVE' Otherwise the IntelliFlo pump is controlled by its control panel on the top rear
- First look at Pentairs new IntelliChlor Plus30 - Trouble Free Pool
13 4 volts x 3 91 amps = 52 4 watts, so the numbers seem off I would expect the voltage to be double or about 26 8 VDC for most SWGs
- Pentair natural gas heater error AGS - Trouble Free Pool
Pentair iChlor 15 Sep 12, 2022 #7 JamesW said: How much flow are you getting? What is the pump speed? Go to the SWG and check the water temperature reading and then turn the heater on and watch how much the water temperature reading increases Why isn't the cell plugged in? View attachment 452899 Click to expand I’m not sure Why this isn
- COMING IN 2025: The IntelliChlor® Plus LT Salt Chlorine Generators
The IntelliChlor Plus LT Salt Chlorine Generators have new and improved modular designs — providing more serviceability, accuracy, and value than Pentair's first-generation IntelliChlor® and iChlor® Salt Chlorine Generators
- Got new modem router and now ScreenLogic doesnt connect - how to set . . .
Thanks for the tips - Resetting didn't work and although I have screenlogic on my macbook, when I launch nothing ever happens Ended up plugging in my old wifi router to the new one and ScreenLogic works for now I'll wait for the hubby to get back in town and pass the job to him with the above tips, since my patch job is a far cry from professional
- IntelliCenter 2. 017 FW Update - Trouble Free Pool
I see that 2 006 has re-appeared on the Pentair download page with the following note: The recently released firmware 2 006 for IntelliCenter Pool Control and Monitoring Systems was found to have a few reported issues
- Pentair Master Temp 250 Cycling on and off - Trouble Free Pool
Bought a house with an pool and heater Inlet water temp is about 60 (desire pool temp is set to 80), burner fires up and then cut off The service heater led light momentarily (sometimes) and the temp read about 100 and begin to reduce rapidly back to 60 A few seconds later the burner
|
|
|