|
- Pendulum does not keep swinging - NAWCC Forums
Remember the clock movement powers the pendulum, the pendulum does not power the clock The fact that the clock runs with the pendulum off indicates that all the internal moving parts are free to move If the pendulum swings and there is no tic-toc sounds then the clock isn't running at all - the pendulum, for lack of a better word, is just
- Catalog of 400 Day Torsion Clock Pendulums - NAWCC Forums
Latest update: Nov 3, 2025 This article is intended to provide a catalog of 400 day clock pendulums to fill in some of the omissions in the Horolovar Repair Guide and other references It will attempt cover as many of the different variations from each manufacturer as examples have been discovered Pictures and descriptions of each pendulum's characterisics will be provided along with the
- Beat Setting 101 - NAWCC Forums
The pendulum passes back and forth across the beat-center in its progression from tick to tock and back The clock is in beat when the beat-center is perfectly vertical: tick and tock impulses are delivered at the exact bottom of the pendulum swing
- Westminster chime and pendulum - NAWCC Forums
I interpreted your word "stem" equating to 'pendulum hanger post', 'suspension spring post', 'suspension cock', etc Shorten it about 1", or whatever it takes to give you the maximum clearance between: pendulum, weights and chime rods
- At slowest setting, Ansonia mantel clock still runs too fast.
Hi guys! I made a thread about my Ansonia Iron mantel clock in the General section It runs and chimes great! But ran very fast I have adjusted the pendulum bob as low as it will go and it still gains 2 minutes per hour I've had clocks run too slowly because of gummed up works or worn or
- Pendulum stops after 10-15 minutes - NAWCC Forums
However, the pendulum does swing in a diagonal back to front motion rather than just side to side If you’re looking at the clock face and start the pendulum by moving it to the right, it will then swing to the left and back slightly, then to the right and forward slightly
- The Dead-Beat Escapement - NAWCC Forums
The action in which the escape wheel transfers energy into the pendulum by exerting force on the appropriate pallet face For most designs, this is 2 degrees If the pendulum is heavy, it will be designed to 1 1⁄2 degrees Lock The quantity of distance a wheel tooth, immediately after drop, overlaps the concentric dead-face of the pallet
- ALL ABOUT PENDULUMS | NAWCC Forums
A basic pendulum consists of a weighted bob, and a stick, hanging from some suspension point The pendulum is the whole thing, because when we talk about "the mass (weight) of a pendulum", we're including the mass of the stick
|
|
|