- Obermeyer barrels? Anyone used one | Snipers Hide Forum
Re: Obermeyer barrels? Anyone used one As was said above and would be revealed if you undertook the most cursory search of the posts on this site, any of the high-end manufacturers (Rock, Bartlein, Broughton, Border, Obermeyer, Schneider, Hart, Kreiger, Brux, Pac Nor, Benchmark, Shilen, Lilja, etc etc etc) should be able to cut you a tube that when chambered properly should suit you needs As
- Gunsmithing - Obermeyer | Snipers Hide Forum
Anyone have any experience with Mr Obermeyer's barrels? If so what can you tell me? What caliber round, twist, length, contour, etc ? What action did you install it on? How long did it take to arrive? I'm looking at a 36"+straight blank in a tight match 30 caliber bore in a 1 9 5 or 1 10
- Obermeyer Chamber Opinion on AR10 | Snipers Hide Forum
Re: Obermeyer Chamber Opinion on AR10 I'm guessing the Obermeyer chamber has a different leade or throat angle to the rifling than the SAAMI 308 WIN chamber If you're able to seat your bullets to a COAL of 2 820 (which works well for a standard 308 WIN chamber) then I would suspect the Obermeyer chamber would give you less jump to the lands, generally increasing accuracy given everything else
- Obermeyer Barrels | Snipers Hide Forum
I have a few questions regarding Obermeyer barrels: Are they all 5R rifling? And what is the M24 barrel profile? His website doesn't list the profile, but I've seen M24 profile Obermeyer barrels for sale A little research turned up dimensions that made it seem as if the M24 and AMU profiles
- Gunsmithing - Obermeyer Barrels | Snipers Hide Forum
Thinking of an Obermeyer barrell in 6 5 Any opinions on Obermeyer barrels compared to Brux, Kreiger, etc Anyones experience with an Obermeyer barrell is greatly appreciated
- . 308 Obermeyer | Snipers Hide Forum
Re: 308 Obermeyer My guess is that a 308 Obermeyer reamer was used to chamber the barrel Subtle differences in throat, neck and etc make this chamber different Do a google search for 308 Obermeyer reamer and I'll bet you'll find a trove of info
- I I - Snipers Hide
A DATE 08 04 04 MINIMUM CHAMBERSCALE NONE
- Gunsmithing - 308win Match Reamer? | Snipers Hide Forum
Re: 308win Match Reamer? Checked the 308 Obermeyer with two 175 SMKs on the LNL gage with three measurements each averaging 2 226" from casehead to the 0 3000" diameter on the ogive Or whatever the real diameter is given the very slight chamfer on the ID of the bullet comparator insert
|