|
- Download and install PaperPort 14 - Brother USA
Procedure 1 Verify that your Brother machine is connected to your computer or network Its software must already be installed 2 Download the PaperPort Install Tool from: https: support brother com 3 Double-click on the file you downloaded PP14Downloader 4 If prompted with a security warning, click Yes or Run 5 Click OK The PaperPort 14 program will be downloaded and extracted 6 The
- Install PaperPort 12 SE from original software disc - Brother USA
For instructions, refer to: 'Download and install Nuance PaperPort 12' This solution applies to Windows XP, Vista and 7 For instructions on how to install the software on Windows 8, refer to: 'Install Nuance PaperPort 12SE into a Windows 8 or 8 1 environment' 1 Insert the Brother driver CD into your computer
- How to install PaperPort 12 SE - Brother USA
If you do not have the CD-ROM that came with the Brother machine, you may also download and install PaperPort 12 For instructions, refer to: 'Download and install Nuance PaperPort 12' To install PaperPort from the CD-ROM, complete the following steps: 1 Insert the CD-ROM into your CD-ROM drive 2 If the model name screen appears, select your machine 3 If the language screen appears
- Scan button is shaded in PaperPort 11, 12, or 14 SE - Windows 8, 8. 1, or 10
The scan button may appear grayed, shaded, or you may receive a message stating: default scanner not attached To resolve this issue, you will need to install the
- How to download software, drivers, or utilities - Brother USA
Objective Where to find available software, drivers, and utilities to download for your machine
- Uninstall PaperPort - Brother USA
Your version of PaperPort and supported operating system will vary based on your machine's specifications Complete the following steps for your operating system to
- How to configure and use the Scan to OCR feature in Windows using . . .
Refer to: 'Download and install Nuance PaperPort 12' For information on how to improve the quality of OCR scans, refer to: 'Improving the quality of OCR scans' If you are using the ControlCenter4 Home Mode interface as shown below, refer to: 'Scan using the ControlCenter4 - Home Mode' ControlCenter4 Home Mode Interface Click the selection you
- How to scan a document into PDF format - Brother USA
1 Open PaperPort: -Windows 7 and earlier: Click Start => (All) Programs => ScanSoft Nuance PaperPort => PaperPort -Windows 8 (All Versions): Click the PaperPort tile from the Start screen 2 If the Scan or Get Photo pane is not already displayed on the left side of the screen, click Scan Settings The Scan panel should then appear 3
|
|
|