|
- Intermatic Timer Motor is working but does not turn time dial.
I have an issue with a T104 Intermatic Timer that the dial will not keep time, thus it will never turn on or off the pool pump The motor is working I can
- Intermatic timer replacement and wiring fix - Trouble Free Pool
Filter pump timer motor (wg1573-5) failed (no longer keeps time; clock face not turning) Enclosure is an Intermatic T21004R Pump is on a 15 amp, 2-pole circuit breaker When I removed the clock portion from the enclosure to get timer motor number, a red wire came loose (naturally, didn't spot
- Intermatic PF1102T Clock Motor replacement - Trouble Free Pool
The gear that engages the timer is also bigger on the the 1573 should have taken a comparison pic so folks could see but I was to bummed that it didn't work and didn't think about a side by side pic Good thing is everything works but the clock so at least the pool stays clean Gives me time to look and try some possible solutions
- INTERMATIC seems to be working but not turning on off anymore
Following Irma and 2 days without power my intermatic timer was set wrong I've reset it per the directions and it's counting time properly, but when it should turn on (10AM, and off 2PM) it doesn't change (just stays in the previous condition) I have to turn it on off myself This timer was
- SOLVED: Intermatic Problem - Trouble Free Pool
UPDATE: Installing the correct voltage time worked I'm such as DumbMule I have a new Intermatic timer (T101R) that I just hooked up to my pool I attached it to the wall and ran two conduits all seemed well I took the Line to A and 1 (where the clock motor was installed) and the load to
- Intermatic PE153 clock loses time - Trouble Free Pool
It’s in the subject Intermatic PE153 It’s the 3 circuit, digital timer, controller There was a thread from last year about the same, but I was asked by moderator to start a new thread I appreciate any input if others have found the component to replace in order to maintain the clocks time during brief power outages
- Timer getting stuck - Trouble Free Pool
I've been having trouble with my Intermatic timer recently I have the regular pump set to run between 2 and 7 each day and the booster pump from 2 to 6 The timer for the pump is regularly getting stuck at the 6:00 position As an example, this morning I discovered the pump was on and when I
- Intermatic timer runs fast - Trouble Free Pool
I have two intermatic timers, a 104r and 101r Both timers are connected to the same circuit at the electrical panel I recently replaced the time clock for the 101 timer (old gears were stripped) and now the timer gains about an hour over the course of a 24 hour period The 104 timer keeps the
|
|
|