|
- turbo on a NHC 250 Cummins? - SteelSoldiers
is it possiable to but a turbo on the Cummins motor that's in the most of the 5 tons? or will it turn out to be to much trouble for any gain that would be gained? just inquiring, thanks Jason
- NHC-250 Fuel Injector Removal Clean Re-install Parts List??
Hey, What are the recommended parts Tips Tricks when removing, cleaning, and re-installing the clogged fuel injectors on an NHC-250? Any guidance Tips from those who have done it would be greatly appreciated! Thanks!! :beer:
- Cummins NHC 250 vs Mack ENDT 673 - SteelSoldiers
I have a quick question Are these two engines anywhere near the same ballpark in regards to horsepower and torque output? I know what is in the manuals but can they be tweaked reliably to perform basically the same?
- Cummins NHC 250 vs 6CTA 8. 3 opinions - SteelSoldiers
CONS -- parts availability, starts better than the NHC-250 in cold weather but still needs a sniff of ether I've had both NHC-250-powered trucks (M929A1, M928A1, M932) and 6CTA 8 3-powered trucks (M936A2, M932A2 and now two M925A2s) While I love the 6CTA 8 3 motor, I would suggest that anyone who is interested stick with the NHC-250-powered
- Jake brake 25A vs. 25B their use with a pulse manifold
I'm to study up on jake brakes and turbos for the small cam NHC 250 and I have 2 questions bundled together here, but i think they're related 1 What are the differences between the jacobs 25A 25B compression brake? What I've read so far suggests the 25A is iron? and the 25B has an
- NHC 250 head bolt torque and sequence | SteelSoldiers
Can anyone point me in the direction for head bolt torque details? Scoured the tech manual had everything but that (also searched prior postings) Have a 923 that had new? Engine installed before decommissioning, and after 2 oil changes and water in oil both times, am going to start
- Nhc250 valve injector overhead adjusting - SteelSoldiers
NHC250 VALVE INJECTOR OVERHEAD ADJUSTING Many of my fellow Haspin rally attendees know that my M818 was quite smokey and running a little rough So, after killing lots of bugs and sending a few prius drivers in the other direction, I decided it was time to address the problem Mostly black
- NHC 250 engine service manual - SteelSoldiers
Does anyone have the actual cummins service manual for the nhc 250, not the tm May the forum gods have mercy on me, searching on tapatalk is a pita!
|
|
|