|
- MultiTech Developer Resources » Downloads
1 Create a support case with the relevant information at https: support multitech com including: a Select Other in the Service Requested drop-down b Select the closest MTCDT or MTCDTIP model to what you have in the Product drop-down (must be a model that ends in 247L or 267L) c In the Subject field, enter Request for Redpine Drivers d
- Unable to login on web interface - MultiTech
Hi there, I am unable to login on web interface I am successful in connecting via ssh using ethernet cable My device ip address is 192 168 2 10 Looking forward for some solution Thank You
- SIM card detected not detected problem - MultiTech
I tried above commands, I saw that, radio-cmd at+cpin is showing ERROR That means, sim is not detected So, I think, there is some issue with some detection So, if you can help someway, it would be good I am using Multitech conduit, with mLinux installed in it, version greater than 5 If you need any more details, please ask
- MultiTech Developer Resources » LoRa Network Server
The network server is the center of a LoRa network, it provides communication between motes and applications It ensures message integrity through CRC, CMAC and sequence number tracking AES-128 encryption is enabled through the use of pre-shared keys
- MultiTech Developer Resources » Forum: Lora Network Server
multitech conduit failed to start concentrator Started by: televisedbrain 1 1 3 years, 8 months ago televisedbrain Deploy the Loraserver on a Virtual Machine Started by: Simon 2 2 3 years, 9 months ago Jason Reiss Multiple Gateways That Are All Packet Forwarders Started by: Jeff Tooley 2 3 4 years, 3 months ago Jeff Tooley ADR, adrAckCounter
- Topic: Problems connecting to AEP Conduit - MultiTech
Michael, There is a debug port that you can connect to behind the plate with the MutiTech logo on it That port is connected to the Linux console output, and can be logged into with admin admin Make sure that the output before the login prompt says mentions AEP That would be the first step to make sure that the correct firmware has been installed If you have the correct firmware, you should
- MultiTech Developer Resources » MTAC-LoRa Cards
The MTAC-LoRa accessory cards enable long range connectivity to distributed assets and sensors using an RF spread spectrum technology by Semtech ® MTAC-LoRa cards also have extended life due to a low power draw The MTAC-LoRa-H and MTAC-LoRa-F accessory cards feature: ISM band scanning and asset management range with LoRa of up to 10 miles 15 km line of sight or 1-3 miles 2 km through
- Getting Started with LoRa Conduit AEP (LoRa Configuration) - MultiTech
Before setting up LoRa, your device should be connected and powered up If not refer to installation information for your device For Conduit installation, see the Conduit Quick Start Guide For Conduit Access Point installation, refer to the Quick Starts or User Guides available through Conduit AP For Conduit IP67 Base Station, refer to the Installation Guide for your model, available through
|
|
|