|
- mirror | TrueNAS Community
SOLVED Drive backup using mirroring: how to restore? Hello! My setup is the following: 1 vdev with 3 HDDs, all 3 mirror of each other (so 3 x 3TB HDD, total available space = 3TB) 2 Drives are just going to spin all the time, mirror of each other, that's the redundancy The 3rd drive, I'll plug it in once every now and then (say: once per
- Some differences between RAIDZ and mirrors, and why we use . . . - TrueNAS
ZFS is a complicated, powerful system Unfortunately, it isn't actually magic, and there's a lot of opportunity for disappointment if you don't understand what's going on RAIDZ (including Z2, Z3) is good for storing large sequential files ZFS will allocate long, contiguous stretches of disk
- SOLVED - Help understanding Mirrored vdevs in relation to pools
12 disks in 6 mirror vdevs give you the IOPS of 6 disks At the expense of less resiliency - one disk is easy peasy, lose two disks and you might still be ok, but as soon as you lose an entire vdev, the pool is toast So your assumption about the right three disks failing is correct
- 3 Drive Configuration | TrueNAS Community
The drive prices for 16TB drives (specifically Exos) are pretty decent compared to 10TB I think, thus why I want 16TB Are there any downsides to a 3 way mirror? Would it allow two out of the three drives fail without incident? Also if you know any documentation on it that would help a lot Also with RAIDZ, adding drives to a pool later requires resilvering, does a mirror 3 way mirror require
- Mirroring the Boot Pool | TrueNAS Documentation Hub
Adding a second storage device to the boot pool changes the configuration to a Mirror This allows one of the devices to fail and the system still boots If one of the two devices were to fail, that device is easily detached and replaced When adding a second device to create a mirrored boot pool, consider these caveats: Capacity: The new device must have at least the same capacity as the
- How can I dispose of large glass mirrors?
I recently remodeled my bathrooms and removed the old flat glass mirrors that were hung on the walls I kept them thinking that I could cut and frame them, but I wound up just purchasing new ones
- troubleshooting mirror vdev wont expand | TrueNAS Community
Related topics on forums truenas com for thread: "troubleshooting mirror vdev won't expand" Unfortunately, no related topics are found on the New Community Forums
- Correct method for converting disks to mirrors in TruenasSCALE
I’ve changed the pool setup on my Truenas Scale box from Spinning to Flash The main pool will consist of 2x Optane 900p 280GB mirrored for Metadata and 6x Samsung QVO 8TB configured as 3 mirrors Given the cost of the drives I’ve started out with single disks in each of the vdevs with the
|
|
|