|
- Mimaki JFX200 - Signs101. com: Largest Forum for Signmaking Professionals
The Mimaki Tech worked here in the shop on the JFX200 the whole day Xchanged all the boards, cables, fibers, print head Hi loaded the latest fiNow appears a message: Ink temp -8 and the machine stops
- Need Help - JFX200-2513 Constant Negative Pressure Issues
First time poster and relatively new sign maker here I operate our shop's Mimaki JFX200-2513 and have been doing the normal maintenance on it for the past 8 months Recently in the past 2 months, I've been having issues with the negative pressure fluctuating between -1 43 and the normal
- Mimaki JFX200 System Halt Error - SYSTEM HALT (*) 509 : HDC POSCNT
We did have a Mimaki Tech come out and they replaced the encoder strip and everything ran fine for a day and then the system halts alignment of the heads to the rubber caps is off again This seems to be hit and miss I think I had this on the old JF1631 and teeth were missing on a belt or gear but we cannot find that issue
- Mimaki CG160FXII and ONYX Cut Server - Signs101. com: Largest Forum for . . .
Setting up a Mimaki plotter to print cut through Onyx Thrive (printed on HP latex, cut on Mimaki plotter, all through ONYX thrive) I've done this many times with Summa and other printers cutters but for some reason I can't get it to work with the Mimaki CG160FXII Onyx will generate the
- Need Help - Mimaki 3042mkii - 11f System Halt
Got laid off during the start of covid and took the Mimaki printer as the severance package After a stressful move things have been ok, until the start of this week Out of nowhere the printer showed SYSTEM HALT (6) 811: fw sio read Tried to scroll through the messages to see if there were
- CJV150 JV150 - Horribly Inaccurate Colors - Dont know what to do
Here you go! On this one, I am using the mimaki expand color (which sometimes seems to get us a tad closer) but realistically both the default and the expand color are out to lunch On some projects it seems to be acceptable, but on the photos I posted earlier for example its horrific I dont know what to do at this point Hopefully this helps
- TS34-1800A - Signs101. com: Largest Forum for Signmaking Professionals
After the start of the machine, press the specific key(s) on the operation panel while the version information is displayed Then the machine will enter the corresponding one of the following service-related modes
- Mimaki JFX200 Color Bending Issues Nozzle Drop
I need help, having serious issues with blue colors, nozzles and drop feed are in good shape, air purge, and even positive and negative pressures as advice, ( negative is -2 70 range) and mine is in -2 68 two more two less, same with the positive in the mid 20s if not mistaken I don't know what
|
|
|