|
- Communication To From My Building. . . . What ports must be open?
My Building communicates between software modules, the network, and other Leviton equipment on the IP network Most of this communication is TCP IP communication, however, some of it is UDP IP This article document what type of communication is required between various parts of the system
- Meter configuration tools, templates, and firmware download | Leviton . . .
Configuration of the Leviton Energy Monitoring Hub datalogger is commonly best done after all meters and devices are configured This page centralizes the download files for all devices
- How do I read the energy usage on my Series 7000, 7100 | Leviton . . .
The meter readings scale automatically on the LCD depending on what data is being reviewed and how much energy has already been counted The scaling will adjust based on the following information: Individual Channels 0-99 9Wh= 0 1WhThe LCD shows Wh readings with a decimal up to 99 9 Wh
- EMHXD Total Number of Devices | Leviton Community Forum
The following list are generally recommended limits for how many devices should be associated to a single Leviton EMHXD logger 31 total hardwired devices per RS485 port (62 total) 200 total devices per EMHXD (assumes ~100 datapoints per device) 1,024 datapoints maximum per device 20,000
- my building | Leviton Community Forum
My Building is Leviton's software solution for control, analysis, dashboards, system wide editing, alarms alerts, energy usage reporting, and the like
- Specification Cheat Sheet | Leviton Community Forum
Boiler plate performance specifications can be downloaded from leviton com to drive the spec process This article quickly walks you through some the specification decisions to be made Connectivity Connectivity between Leviton devices and the server running the My Building software is
- Energy Monitoring Hub Data Export | Leviton Community Forum
A brief guide to use the manual data export features of Leviton Data Acquisition Servers (A7810, A8810, A8812)
- On Off switching DRD07 | Leviton Community Forum
What could cause a DRD07 to strobe on an off with a 2-3 second cadence between switching on an off?
|
|
|