|
- How to change lens on your H - Yuneec Drone Forum
Lens removal on H is pretty straight forward except for heavy amount of glue paste they use for original, note second picture Just remove the 8 screws on the camera cover, no need to disconnect antenna as there is enough cable to put it to the side There are two small sensors attached to
- CGO3+ LENS REPLACEMENT QUANDARY - Yuneec Drone Forum
The lens weight remains the same but the mass moment arm changes with movement of the lens elements The CGO-3 gimbal was not designed with multiple lens options in mind so any change in lens carries the risk of altering the weight and balance enough to prevent the software and actuators from fully stabilizing the image
- CGO3+ lens replacement adventures - Yuneec Drone Forum
The "surgery" itself went without surprises - disassembled the camera, removed the sensor module, removed the lens mount, installed one from pixaero, installed the lens and put it all back together In the end it even felt less complicated than i expected it to be (even the lens mount came off the board without much resistance and fuss)
- PixAero Lens Upgrade | Yuneec Drone Forum
Has anyone done the lens upgrade on the newer style of CGO3+ lens Mine has the fixed lens that is glued to the sensor board I understand that i will need to remove this and use the screw adapter that the Pixaero comes with, but unsure as to how to remove the stock lens Any help or photos of
- Lens cover for C23? | Yuneec Drone Forum
As jb57 states, the lens of the C23 is in fact a 39mm lens and; Yuneec does supply a 40 5 mm adapter ring but since you mentioned you don't know much about photography stuff I would add that typical camera lenses (DSLR's, Point-n-Shoots or whatever), have a lens that is threaded female and all standard lens filters and covers like the one in
- Peau 3. 97 lens install. | Yuneec Drone Forum
Just got to test the Peau 3 97 lens Jimmy Oliver with ShadowQuad installed in the CGO3+ on one of my H480's Used a Yuneec dark UV even though it was overcast This is a first pass focus but I was impressed with the narrower FOV and the increased focal depth Still working at getting camera
- Camera, Lens Options | Yuneec Drone Forum
The lens can be changed quiet easily On my Typhoon H (CGO3+) I swapped the original lens to one made by Peau Production The main reason for doing so was not to gain more focal length but to improve color and sharpness, since many CGO3+ had some trouble with it Mine had blurry areas on the left side of every image or video The improvement is
- camera lens protector for cgo-3 on ebay | Yuneec Drone Forum
i ran across this item for sale on several ebay sites: Ec 3D Printed Camera Lens Protective Case Cover Cap for Yuneec Q500 Quadcopter Ec 3D Printed Camera
|
|
|