|
- Where can I get a true kink free garden hose?
HD, Lowes and even Amazon advertise 'kink free' hoses and none of them are worth a ****! I've tried em I coil them up loosely on garden hose hangars mounted to the house and every one of them kink, in multiple areas, when I remove it I need a 75' truly kink free hose Any ideas?
- Tips on bending mini split line sets? | The Garage Journal
The more you bend it the harder it gets to straighten and rebend, it will make it more likely to kink The 1 4" is easy, you can kink it but you almost have to try to kink it
- Best replacement for Rigid shop Vac hose | The Garage Journal
trying to find a GOOD replacement for the awful rigid hose that came with the Vacuum the Vac is excellent! the hose is ****! the fitting size is 2 25" and the hose is a bit larger has anyone found a more flexible replacement? Thanks!
- Mini-Split line lengths can be changed. | The Garage Journal
My plan is to install a 24,000 BTU mini split in my new 40’ x 23’ garage, that is attached to my 20’ x 20’ old garage There is a 9’ wide walkthrough going from one garage to the other The ceilings are each 8’ and both garages will be insulated My question is, will my HVAC install guy
- How to secure black iron pipe as it passes through exterior wall
Working for a propane company, nothing more is done that drilling a tight fitting hole thru the wall at a slight downward angle to the outside for the black iron pipe Attaching the pipe on the inside with straps to the wall or what ever is enough to secure it As far as hooking up tanks, rubber hoses are frowned upon due to degradation from the sun I would run black iron pipe up the outside
- Getting Metal Panels On Roof | The Garage Journal
Not sure i would try to rush the job Those panels can get real floppy at the wrong time, and it would be really unfortunate to kink one
- Need a recommendation for brake line flaring kit
I am going to have to make all new brake hardline for the Rusty Corvair project car I have to admit, this will be something new for me - I haven't flared a brake line since high school Anyhow, I am in the market for a good flaring kit to make the lines Quality and "user friendliness" is as
- Kwik Fabs Small Shop | Page 5 | The Garage Journal
One vehicle I do miss working on is the 1FZ I had in my 80 series With the radiator out, you could literally sit on the rad support and hang out in the engine bay Although the worst part about that thing is also something I had to replace - the power steering pump as it was failing Even with smaller hands, that thing was a nightmare to pull out Picture above is when I pulled the radiator
|
|
|