|
- Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4
The switches are not rebooting or having links that change status before the appearing of the log "Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4" so I'm at a point that thinking about something else is becoming difficult
- ipv6 between nx os nexus 7K and ASA firewall - Cisco Community
Hi - I'm receiving a strange message from my Nexus 7010: Jan 30 09:45:22 10 1 3 1 : 2012 Jan 30 09:45:22 EST: %ICMPV6-3-ND_LOG: icmpv6 [4740] Inconsistent RA retrans-timer on Vlan24, ours is: 0, from fe80::21b:54ff:fef7:9205 Jan 30 09:45:22 10 1 3 1 : 2012 Jan 30 09:45:22 EST: %ICMPV6-3-ND_RA_
- Inconsistent Mask and Address Error - Cisco Community
Hello Johmon171, The problem is pretty straight forward in your case you are entering the static route in wrong format consider the following ip router entry as sample ip route 192 168 1 192 255 255 255 224 192 168 1 66 192 168 1 192 === destination network to reach 255 255 255 224 === destination subnet mask 192 168 1 66 === ip address of next hop you can also specify the exit interface to
- Inconsistent peer vlan and Inconsistent local vlan
This makes Nexus complaining about inconsistent peer vlan and Inconsistent local vlan In short, I need to "translate" vlans 31,32,33 into vlan 21 Vlan translation 1-to-1 won't work as I can't add multiple entry with same translated vlan Vlan translation n-to-1 won't work as it makes QinQ (as far as I get it from documentation)
- Solved: Inconsistent address and mask - Cisco Community
Solved: Hi, i have a trouble today i get errors like : %Inconsistent address and mask i try to ip route 10 0 2 0 255 255 252 0 nexthop i dont put next hop but that info was irrelevant But dont work Any help?
- Solved: %Inconsistent address and mask - Cisco Community
Our ISP has set up a modem at our location with the following IP and subnet: ip 96 74 187 50 mask 255 255 255 252 I'm trying to put in an ip route to the next hop which is our firewall switch> ip route 96 74 187 50 255 255 255 252 10 10 22 5 when I do this I get %inconsistent address and mask We wer
- Inconsistent address and Mask - Cisco Community
When statically routing a route in the format [destination network address] [mask] [next hop address or interface name], I get the Inconsistent Address and mask error
- Portchannel flapping due to VLAN ID inconsistency
Considering this, however, note that Marius reported many peer inconsistent PVIDs being complained about to a single local inconsistent PVID of 1 That would suggest that the PVST+ BPDUs arriving on the offending switch were all untagged - or processed as untagged - and being therefore put into VLAN 1, hence creating multiple reports of PVID
|
|
|