|
- HamClock on Windows!!! | QRZ Forums
I posted a video a while back showing that HamClock can be loaded on a Windows system Since then a lot of people have commented that they have had
- Quadra Quickstart including HamClock Bundle - Inovato
If HamClock is running full-screen, this won't be visible To exit HamClock full screen mode (or most applications), simply press Alt-F11 (Fn-Alt-F9 on the mini-keyboard)
- HamClock on Windows!!! | Page 2 | QRZ Forums
So, I have made a video going through the steps in real-time on how to load and configure Hamclock on a Windows computer, I tried this setup on both Windows 10 and 11, and it runs just fine on both
- HamClock How To From a Linux Admin - QRZ Forums
HamClock How To From a Linux Admin Discussion in ' Amateur Radio News ' started by KM9G, Jul 21, 2021
- Updated firmware Image - The Inovato Community Forum
Updated HamClock to 4 06 Added an on-screen keyboard ("onboard" in the Accessories Menu) so initial setup can be done with just a mouse if desired sudo apt update sudo apt upgrade
- Common Questions and Answers - The Inovato Community Forum
HamClock won't start on boot (and other boot problems) Started by Michael Burmeister-Brown in Frequently Asked Questions: If the Quadra is powered off without a proper shutdown, rarely it may ask for a password on boot, and the default password (unchanged) is not recognized
- Doing a Factory Restore - The Inovato Community Forum
Step 2: Restoring your Quadra using the Factory Restore SD Card:Unplug or don't connect a monitor at this point as the installation is automatic if one is not connected This is essential If you don't do this, HamClock will just run from the SD card and will not restore the internal memory This leaves your restore SD card vulnerable - you only want to use it to restore the internal memory
- Making Backups - The Inovato Community Forum
You can then restart HamClock by selected "Restart" from the Quadra menu (upper right corner of the screen) If you keep this memory stick, you can always use it to restore your HamClock settings to the state it was it when the backup was made ------------- The following is an optional way to make backups for your entire system
|
|
|