|
- [SOLVED] CPUID HWMonitor temps ok? no idea how to read this.
Min (minimum temperature recorded since HWMonitor started) Max (maximum temperature recorded since HWMonitor started) I'm going to assume the temps above are whilst idle low load 30-35 degrees is very cool No issues at all Then under load you will want to keep them below 80 degrees effectively
- Question - CPU-Z vs Hwmonitor - Toms Hardware Forum
I have the core voltage set to 1 4 in Bios, however Hwmonitor shows 1 225-1 235 when in full load and 1 36-1 37 when in idle, CPU-Z on the other hand shows 1 37 in full load and 1 508-1 528 in idle Which is the real voltage? And is this good behavior of the voltage? I have an 11900k an z590 maximus extreme if it matters
- Question HwMonitor, CoreTemp, Real Temp Readings VERY Different?
I rolled back my 5 0ghz OC before I installed the new PSU and didnt change it back while I test ran things tonight But I did have it at 5 0ghz 1 35V at 69c in HWMonitor 2 days ago stress testing at 100% CPU load While I was playing Call of Duty I noticed HWMonitor was showing a package temp in the 50s but each Core was showing around 85c
- HWMonitor CPUID: What is CPUTIN, AUXTIN, SYSTIN and TMPIN3?
CPUTIN = CPU Temperature Index AUXTIN = Auxiliary Temperature Index SYSTIN = System Temperature Index CPUTIN is different from CoreTemp
- [SOLVED] Good hardware sensor monitor? - Toms Hardware Forum
Utilities like HWmonitor, Openhardware monitor and Speccy, tend to COMMONLY misreport sensor data, or not report it at all After installation, run the utility and when asked, choose "sensors only" The other window options have some use but in most cases everything you need will be located in the sensors window
- [SOLVED] Which temp program should I trust? - Toms Hardware Forum
HWmonitor, Open hardware monitor, Realtemp, Speccy, Speedfan, Windows utilities, CPU-Z, NZXT CAM and most of the bundled motherboard utilities are often not the best choice as they are not always accurate Some are actually grossly inaccurate, especially with
- What is utilization limit and power limit in hwmonitor under . . .
Hello i have a gtx 1070 fe edition and i was playing witcher 3 for 1 hour the max temp of cpu is 49 so great on the gpu it is 78 at max i dont knoe if it is good or no i mean hot or no but from what i know it is a good temp and normal for the fe edition card but now what is the utilization limit
- Is this Legit software for temp monitoring . . . - Toms Hardware Forum
Sure is, run it 24 7 on my media center Just note it may pick up some sensors that are not connected and thus give very strange readings(but be perfect on other boards just so many boards on the market)
|
|
|