|
- Recommended firewall settings - Network and Wireless Configuration . . .
If you pull up Network>Firewall what are the recommended settings for "General" and "Zones?" Upon reading google hits, many are showing a "Lan -> wan" setting of "reject" for forward whereas the out-of-the-box settings have that set to "accept" including this OpenWRT wiki
- Managing firewall rules manually - OpenWrt Forum
Hello great team I have a device running the last version of OpenWRT, which seem to work so far However, I would like to manage the firewall rules using an nftables script I would upload over sftp on the device My preliminary tests seem to work, and are replacing the firewall rules accordingly However, I would like to know, if I can disable the web interfaces that manage the firewall rules
- Firewall rule to allow incoming only from specific ip address
firewall rules Depends how much you trust the firewall on the VPS I'd probably put the VPN in its own firewall zone and use rules to allow forwarding
- [SOLVED] IPTV, IGMPProxy and Firewall issues - OpenWrt Forum
I am using Lede with igmpproxy to view routed IPTV on my television It is already working, but especially for higher bitrate channels I am getting the occasional stutter even though the connection is otherwise idle I enabled firewall logging for the zone that is used in my iptv connection and I am seeing packets being rejected which shouldn't be rejected iptv interface (iptv comes in as
- Introducing OpenWRT Tabbed Firewall Rules – A Cleaner Way to Manage . . .
Posted this in Reddit some days ago, I would like to share it also there Following my first attempt to improve the LuCI interface so that Firewall rules would be displayed in separate tabs based on their originating zone: OpenWRT-Viewer, this is my second attempt, implemented directly in LuCI without using an external server Just check the README file
- Disabling firewall features on AT T Arris BGW210-700 Gateway
I have an AT T Arris BGW210-700 gateway setup with IP Passthrough in front of my openwrt router Are these advanced options safe to disable with the default settings on openwrt’s firewall? Screenshot is the defaults but I want to turn them all off There’s also a toggle to enable the packet filter for the BGW210 which I have turned off
- Firewall4 NFtables Tips and Tricks - OpenWrt Forum
How can I translate that to fw4 etc config firewall? So far my attempt looked like below however tcpdump shows a lot of connections to different addresses
- What are the default firewall zone settings? - OpenWrt Forum
Novice user here - I was trying to set up a separate VPN interface to restrict vpn traffic only to a couple of IP addresses on my LAN, and in the process of playing with the new zone configuration, I'm afraid I may have messed up the default zone configurations My configuration showing up in LuCi is: Zones => Forwardings | Input | Output | Forward | Masquerading lan => wan | Accept | Accept
|
|
|