|
- Guide: Port Forwarding with ProtonVPN and OpenWRT
This guide was created using the thread linked below, but is expanded to include a service that automatically updates the forwarded port in the firewall Thank you Magenta7602, egc, trendy and brada4 for all your help! Another important source of information that helped create this guide was: This guide assumes that you have ProtonVPN configured in your OpenWRT router, with a lan and a vpn
- Firewall rules (forwarding) - OpenWrt Forum
The zone level forward rule controls forwarding between two or more networks that are in the same firewall zone This is intra-zone forwarding If that is set to accept, it will allow those networks to communicate with each other unless there are any other rules filtering prohibiting those connections
- New Firewall Rules Not Applying To Established Related Traffic
I'm using now v22 03 0 on Archer C6 V2 US However, I remember this issue also happened with v19 I want to create some rules to restrict some traffic at specific times of day I created my rules on LuCi Firewall - Traffic Rules Problem is, firewall applies this config: chain forward { type filter hook forward priority filter; policy drop; ct state established,related accept comment "!fw4
- Managing firewall rules manually - OpenWrt Forum
Hello great team I have a device running the last version of OpenWRT, which seem to work so far However, I would like to manage the firewall rules using an nftables script I would upload over sftp on the device My preliminary tests seem to work, and are replacing the firewall rules accordingly However, I would like to know, if I can disable the web interfaces that manage the firewall rules
- Raspberry Pi 4 vs OpenWrt One for routing, firewall, NAS, and offsite . . .
Hello helpful forum folks, I'm looking for server hardware to run OpenWRT and provide dedicated routing, firewall, network-attached storage access, and offsite backup (of NAS, via rclone) Internet access will be provided to the router via a Quectel RM520N-GL in a standalone modem enclosure A dedicated wireless access point will be located downstream from the router I'd really like for the
- Firewall: functional difference between port forwards and traffic rules
Hello, I was following some tutorials for setting up a Wireguard server This one uses a port forward as follows: While the official OpenWrt tutorial advises to use the following traffic rule uci set firewall wg="rule" uci set firewall wg name="Allow-WireGuard" uci set firewall wg src="wan" uci set firewall wg dest_port="${VPN_PORT}" uci set firewall wg proto="udp" uci set firewall wg target
- Using iptables in v24. 10. 1 - OpenWrt Forum
Only manually defined iptables code firewall rules would be relevant here Anything running on the level of the UCI LuCI firewall configuration is already compliant and compatible with the iptables -> nftables migration insofar as these are higher level firewall descriptions where the underlying nftables rules are abstracted from the user
- Firewall is running? - Installing and Using OpenWrt - OpenWrt Forum
The firewall is part of the kernel, it's not an independent process, and there is nothing running while the firewall is active What the firewall service does is to load the rules from the config files, configure the rules in the kernel, and finish
|
|
|