|
- Ram cummins reliability | Cummins Diesel Forum
Hey all, I stumbled across a thread here regarding lifter failures on 2019+ rams I was not aware of this when I bought this truck 2023 Ram on Nov '23 It's June '23 built truck and I'm coming from a 2012 f250 prior to getting this ram I mainly wanted ram due them going back to the CP3
- Grid heater death bolt | Cummins Diesel Forum
Hello Been reading about this stupid bolt that breaks or what have you in the grid heater causing engine failure What are the affected years? Having a hard time finding that specific information I have a 22 and was curious if this model year is affected Thank you
- New 7. 2L Cummins revealed | Cummins Diesel Forum
There is no way RAM will put this engine in a light-duty truck if it is 200 lbs heavier; the Cummins is already the heaviest engine of the 3 as it is Also, with the 7 2L having the same bore but a longer stroke, good luck matching Ford’s 500hp; the current 6 7 doesn’t rev that high and already has a very long stroke; lengthening the stroke anymore will just make it that much harder to
- Block heater engine temperature | Cummins Diesel Forum
I recently bought a used 2017 with 87500km with the 6 7 engine and I have been plugin it in each evening as I live in Quebec and the nights are cold and go down to 14 fahrenheit on avergae Just I notice the engine coolant and oil temperature in the morning when I get in the truck being at 40
- 5. 9 overheating nightmare | Cummins Diesel Forum
2005 3500 dodge ram with a 5 9 cummins Overheats Temp fluctuates from 200 then down to 180 then back up , and eventually heats to 260 We have replaced, waterpump, head and gasket, new high flow radiator, upgraded to aftermarket electric fans, cummins thermostat, ran aux cooling line from
- 4th Gen Heater Core Issues | Cummins Diesel Forum
My heat issues started in November when it started to cool off To make a long story short, I have tried just about everything possible to avoid pulling the dash to replace my heater core What I have tried : Replaced the thermostat w OEM Cummins Multiple heater core flushes, 5-6 times
- 2025 cummins returns to cast iron block | Cummins Diesel Forum
So Cummins went back to the cast iron block for 2025 The research I could find indicates the CGI block was weak in the main bearing areas and was causing
- Oil recommendations for the HD 6. 7 Cummins
Time to change the oil, and I'm seeing 5W40, 15W40, conventional vs synthetic, lots of options I change the oil in my Cumminz'z every 5000 miles whether they need it or not - I feel there's enough soot buildup over 5000 miles to warrant fresh oil that often, especially for the heavy hauling I
|
|
|