|
- RemoteFX - social. technet. microsoft. com
Configuring RemoteFX on a Remote Desktop Session Host Server Use the following procedures to configure RemoteFX on an RD Session Host server:
- Pass-through disks are disappearing after configuring MPIO on Windows . . .
The KB applies to Server 2012 R2 and earlier versions I'm not sure if it is supported on Server 2016 since there are no official documents about it >>After configuring MPIO in guest VM that is in my case Win-VM, few pass-through disks are disappearing from Win-VM If MPIO is not configured, are the pass-through disks appearing?
- ADFS 2. 0 Tracing error, There is not enough space on the disk
Based on my experience, the trace log file size of AD FS is configured to be 10 GB by default and the log will recycle and overwrite older log file data with more recent log data
- How to not allow admin accounts to logon via RD Gateway without . . .
The external access work very well When I connect via RD Client (ponting to RD Gateway) with a user test account, the RD GW verify CAP policy, then authenticate the user then verify the RAP policy and finaly the session open on RDS-SH
- An error in configuring group policy the system cannot find the file . . .
I think the 4 2 2 2 external (public) DNS addresses are causing the problem The following kB can tell you why using a public DNS server for AD doesn't work You can try to remove the public DNS servers from vaepldc and configure it as FORWARDERS on the DNS server properties in the DNS management console After changing the ip settings run ipconfig flushdns and ipconfig registerdns and
- RDP Stuck On Configuring remote session. . .
We have Windows 2012 R2 Server however, while trying to access the server its getting stuck on configuring remote session point, so here the solution for How to fix RDP stuck issue at configuring remote session
- SharePoint 2016 SMTP server authentication section missing when . . .
I need to setup the SMTP relay setting to use an authenticated account for outbound emails, however, I do not see theSMTP server authentication section when configuring the outgoing email
- NPS Wireless Authentication suddenly not working. reason code 16
3 A certificate with the server authentication purpose and correct subject alternative name must be installed on NPS Note: This procedure must be completed prior to configuring PEAP on NPS (step 4 below) 4 NPS must be configured to perform PEAP authentication The preferred method to configure NPS is using the scenario wizard in the NPS console
|
|
|