- How to send a text message via AT+CMGS? - Stack Overflow
I am testing different AT commands including the one used for sending a text message, which is AT+CMGS From what I've read online, you just need to provide a phone number as shown below and enter
- AT+CMGS - Can not excape text input mode - Stack Overflow
AT+CMGS - Can not excape text input mode Asked 6 years, 1 month ago Modified 4 years, 1 month ago Viewed 1k times
- How to clear the +CMGS: lt;x gt; response after sending an SMS via AT+CMGS
"Here is an example that gives you some idea of how an actual information response should look like: +CMGS: 5,"07 02 05,08:30:45+32" The message_reference Field The first field of the information response of the +CMGS AT command, message_reference, contains an integer in the range from 0 to 255 It is a reference number allocated by the GSM GPRS modem or mobile phone to the SMS message sent
- serial port - AT+CMGS returns ERROR - Stack Overflow
19 I am using SIM900 GSM module connect to my AVR Microcontroller I tested it with FT232 to see transmitting data First Micro sends AT it will response OK AT OK AT+CMGF=1 OK AT+CMGS="+9893XXXXXX" returns ERROR and doesn't show ">" Could anybody advise me what to do?
- How to send SMS by GSM modem in PDU mode? - Stack Overflow
First of all, to send sms when modem is in pdu mode, you must send these commands: AT+CMGS=<length> <CR>, where length is (length of PDU binary string - 2) 2
- How to Send Receive SMS using AT commands? - Stack Overflow
Can anyone help me to send and receive SMS using AT commands in Python? In case it matters, I'm using Fedora 8 Which phone will be better with Linux (Nokia, Sony Ericson, Samsung, )? Will all
- Can AT+CMGS be cancelled without ESC? - Stack Overflow
Is it possible to have AT+CMGS commands cancelled by some control code other than ESC? I need it because ESC is intercepted by the attached equipment for its own use and never gets to the modem An
- sms - AT+CMGS doesnt work correctly - Stack Overflow
You are correct in your assumption, 27 005 states for AT+CMGS: the TA shall send a four character sequence <CR><LF><greater_than><space> (IRA 13, 10, 62, 32) after command line is terminated with <CR>; after that text can be entered from TE to ME TA (TA (terminal adapter) is modem, TE (terminal equipment) is sender of AT commands) However, in practice some additional small delay might be
|