|
- Forum list | CJ-8
CJ-8 History Production Questions and topics related to the how CJ-8 Scramblers were originally equiped, production information, etc
- Holley Sniper EFI install on my 258 - CJ-8
I intended to take a bunch of pictures and make sure I document my experience installing the Sniper on my Scrambler I probably did not get enough pictures or take enough botes, but here goes To start off, I replaced a Holley 4bbl carb mounted on an Offenhauser intake Is it more carb than
- What is the best lift kit with the softest ride? - CJ-8
Just bought a 1983 Scrambler and doing some restoration to it I want to get 35's on it but need to add a lift kit I have been told that Skyjacker has the best ride but also should look at Old Man Emu Need some experienced Scramblers with some advice on these lift kits with the softest ride
- Warn AMC 20 Rear Full Float Axle - Installation Instructions - CJ-8
Scan of provided installation instructions Credit Warn Industries, Inc
- Anyone here run a 5. 3 with an AX15 behind it? - CJ-8
If you're looking for a smaller 5 speed you may want to consider an NV3500 It's similar in rating to the AX-15 They came behind 4 8L engines It was never offered behind a 5 3 Torque rating is right around 300 ft-lbs so it won't likely stand up to sustained hard abuse behind a 5 3 Bolts right up to the 5 3 with stock parts at very reasonable prices I adapted it to the D300 using a new input
- Complete Builds Restorations - CJ-8
Dedicated to complete builds, rebuilds and restoration threads from start to end
- Suspension Upgrade Opinions For A Roughly Original Scrambler - CJ-8
Had Alcan 4" on a CJ 5 loved them rode way better than the Scrambler Neither was shackle reverse As for Sway bars I had disconnects on both The Scrambler I unhooked and rehooked a couple of times unhooked and removed the sway bar The CJ 5 unhooked and rehooked a couple of times, hooked them up and never unhooked again as long as I owned it
- Best Engine Swap? - CJ-8
Toying with the idea of keeping the Scrambler (wife has already agreed) but this will definitely require performing an engine swap to make it long distance at 65 mph and partly to satisfy my need to tinker :D Was considering dropping in a 4 0 fuel injection engine with an automatic
|
|
|