|
- 2nd gen to 3rd gen bed dimensions - Tacoma World
2018 Tacoma: Length 60 5" or 73 7" Depth 19 1" Inside Bed Width: At Tailgate 53 4" At C-Channel 56 7" Between Wheel wells 41 5" The floor of the bed is the same The tailgate panel is the same but the caps are different The main differences are on the 3rd gen there is no front rail and all the sides are about 1" taller
- Bed Drain? - Tacoma World
So, we have been getting an enormous amount of rain lately, and the bed of my Tacoma is just filling with water when it isn't driven Are there
- List of Bed Towers Racks Compatible w Tonneau Covers
List of Bed Towers Racks Compatible w Tonneau Covers Discussion in ' Tonneau Covers, Caps and Shells ' started by sawdustking, Mar 11, 2020
- Bed dimensions of 2016 - Tacoma World
wndering the bed dimensions on new Tacomas compared to old From my research it seems like the only difference is the tailgate "bulge"
- 2025 Bed lights, exposed wiring - Tacoma World
I noticed today that the bed lights wiring comes up inside the bed and then runs across to both sides (see attached picture) Does anyone else have these lights on their 2025 truck and is this how they are run? The replaced the bed of my truck and I am not sure if it came from the factory this way of the body shop did this
- Tacoma Loose Bed design Flaw explanation
If your bed is loose, remove bolt and see if metal sleeve is in line with floor of bed If it protrudes above the floor it means the composite block mount has eroded DO NOT GRIND IT FLAT WITH A GRINDER TO MATCH THE LEVEL OF THE FLOOR!!! You will cause misalignment of the bed The spacer is the height guide
- Bed mounted winch (lightweight pulling) - Tacoma World
Use the bed bolts for the winch??? Another option is to mount the winch on a 2x6 and put in the bed pockets so that you can remove the winch if you need full access to the bed Could then put straps to the D rings to hold the 2x6 down while winching
- Sleeping platform and drawer system for 2nd gen long bed
Here’s a sleeping platform drawer system build thread to help others with their designs, just like others helped me For reference, I’m certainly no
|
|
|