|
- 2nd gen to 3rd gen bed dimensions - Tacoma World
2018 Tacoma: Length 60 5" or 73 7" Depth 19 1" Inside Bed Width: At Tailgate 53 4" At C-Channel 56 7" Between Wheel wells 41 5" The floor of the bed is the same The tailgate panel is the same but the caps are different The main differences are on the 3rd gen there is no front rail and all the sides are about 1" taller
- List of Bed Towers Racks Compatible w Tonneau Covers
List of Bed Towers Racks Compatible w Tonneau Covers Discussion in ' Tonneau Covers, Caps and Shells ' started by sawdustking, Mar 11, 2020
- Bed dimensions of 2016 - Tacoma World
wndering the bed dimensions on new Tacomas compared to old From my research it seems like the only difference is the tailgate "bulge"
- Bed Drain? - Tacoma World
So, we have been getting an enormous amount of rain lately, and the bed of my Tacoma is just filling with water when it isn't driven Are there
- Bed mounted winch (lightweight pulling) - Tacoma World
Use the bed bolts for the winch??? Another option is to mount the winch on a 2x6 and put in the bed pockets so that you can remove the winch if you need full access to the bed Could then put straps to the D rings to hold the 2x6 down while winching
- Tacoma Bed removal
Thanks everyone for the bed removal help, I started the removal and the four bolts toward the cab were fairly easy, but the two in the rear were nut and bolts which I had to cut with a grainder ,due to the notorious RUST With that said I purchased all new hardware from Toyota to replace all nuts ,bolts and washers Thanks again everyone
- Truck bed parts hardware list - Tacoma World
Truck bed parts hardware list Discussion in ' 3rd Gen Tacomas (2016-2023) ' started by Barcelonaleo, Nov 25, 2024
- Filling bolt holes in bed - Tacoma World
The previous owner of my truck added some extra tie-downs to the bed, two of which - annoyingly - they added on the raised strips (versus keeping them
|
|
|