- Recreational Vehicle standards - ANSI A119. 2 - Pirate 4x4
support systems which meet the American National Standards Institute National Fire Protection Association (ANSI NFPA) 501C Standard and provide at least four (4) of the following facilities: cooking, refrigeration or ice box, self-contained toilet, heating or air conditioning, or both, a portable water supply system including a faucet and sink
- 2004 24 Pace American Carhauler Toyhauler - Pirate 4x4
2004 Pace American 24' Explorer RT Toy Hauler Sold my motorhome, selling the Toyhauler I pulled behind it as well It's model RE8524TA3H All standard toyhauler amenities, fold down couches beds, full bathroom and shower, sink, refrigerator,* 2 6 volt batteries (1 year old), 12v 110 power w
- AN single flare vs. 45 degree double flare Brake. . . - Pirate 4x4
It was my understanding that AN is all single flare and is 37 degree while standard automotive brake lines are double flare and 45 degree The structure of -AN fittings supports the inside of the flare eliminating the necessity for double flare All "double flare" means is that the tubing is flared and then doubled back upon itself
- Cheap extended diff breather tech - Pirate 4x4
The thread on the stock toyota vents is a 10mm x1 00mm pitch, but an 1 8" standard american pipe thread is so close it may as well be metric It is 1 8" x 1 00 pitch for all the tech geeks All you need to do is to source a couple of grease gun hoses, Lubrimatic or any other brand will work, they're all the same for standard grease guns
- HSS - Pirate 4x4
this publication may be produced to either standard The SAW method is not included as a manufacturing process in the ASTM or C SA specification SAW sizes listed in this publication can be specified to meet desired physical and dimensional criteria of ASTM A500 and CSA G-4 0 21 Submerged Arc Weld (SAW) Process
- Trailer build C channel frame question. - Pirate 4x4
You'd think this would be easy to find out Well, not for me so far Uuuuugh Gonna build a 14k equipment trailer, basically a flip up ramp skid steer trailer Frame will be double stacked 6" C channel steel with 3" C channel cross members 16" on center I can not find out what weight steel
- 22RE Cam Info and Specs - Pirate 4x4
All the common specs- it’s pretty much an American industry standard at 050”), The Centerline in degrees ATDC for intake, and Centerline in degrees BTDC for exhaust, Duration @ 050” BTDC, Close @ 050” ABDC, Max Lobe Lift in inches, Rocker Arm Ratio that the cam grinder used, Lobe Separation in cam degrees, Intake Gross Valve Lift in
- Brake fittings. . . can someone help me understand? - Pirate 4x4
The JIC wanted the prestige of SAE for the fitting standard They convinced SAE to take on the task and helped in the development of the standard Thus, the SAE standard 37° flare fitting became part of SAE J514 in 1950 The fitting became an ISO standard, ISO 8434, in 1986, replaced by ISO 8434-2 in 1996
|