|
- Hex EzCan + Denali D2 + Flickering - Adventure Rider
Like the CW lights, the Denali's are a 3 wire light system and that the ezCAN is not really set-up for I plan to switch to the 3-wire Denali branded HEX developed CANSmart system I took it from HEX website FAQ the ezCAN would work For the most part the ezCAN does work with the Kristas except for the dimming below 70%
- Hex EzCan Accessory Manager | Page 60 | Adventure Rider
If the grips are off, the ezCAN Heated Gear circuit will be off If the bike is set to Stage 1, then the ezCAN output will be at the setting you have for Stage 1, and similarly for Stage 2 This allows you to use the ezCAN to adjust the output of the Heated Gear circuit based on the heated grip option on the bike
- HEX EZCAN II connectors compatible with ANY aux lights?
It looks like cansmart hexcan ezcan has been update to control the Lone Rider ones and D7 pros From the videos I've watched, it seems that they use 2 channels ports (but I could be wrong) What I ended up doing is moving my original D4s under the oem spot (with yellow cover) and installed the auxbeams under the nose
- Lone Rider MotoLights
Their MotoCan is literally a EzCan just rebadged It’s the software interface that will be slightly different but LoneRider have already confirmed it will work anyway “If you have the Gen II ezCAN with software version 2408 or later, it will work (this version is needed to update to the MotoLights version)
- W S and Hex EzCAN - Adventure Rider
Those with the EzCAN, do you have the gear hooked to it or running a separate controller? As of right now I ride into the mid 40’s with a battery powered W S shirt, at speed it’s all it can do to keep the chill off on high setting and the battery is dead in 1 5-2 hrs
- Hex ezCAN on KTM 890 - Adventure Rider
I bought the Hex ezCAN for the 790 but I have an 890 (I should have read the description more clearly but now I have what I have) Is there any reason to believe the ezCAN cannot work on the 890 if I can identify the CAN High and CAN low cables in the 890's harness?
- EzCan Heat Control? - Adventure Rider
The ezCAN 2 0 let's you run 2 auxilliary sets of aux lights but control is not independant from what I read (is it the same on ezCAN v2?) The canSMART though let you control both seperatly and I see on HEX website, if you click "three wires aux lights", it shuts both lights off when activating a turn signal so i'll continue in the weirdo
|
|
|