|
- Fixed vs. Closed Dimensions for Rubber Molds - RPM Rubber Parts
When manufacturing rubber parts, understanding fixed dimensions (machined cavity spaces) and closed dimensions (where mold halves meet) is crucial for proper mold design
- Factors Affecting Tolerances in Molded Rubber Parts - Timco Rubber
Closure Dimensions — Are vertical to the mold parting line or to the parting lines of the major mold sections and are those dimensions that are affected by flash thickness variation
- Standards for Dimensional Tolerances - Molded Rubber Parts - Vicone
The following provides a common terminology for use in discussing dimensions of molded rubber products, and for distinguishing various tolerance groupings: Fixed Dimension: Dimensions not affected by flash thickness variation
- Dimensional Tolerancing - Molded Dimensions Group
When designing inserts for molding to rubber, several additional factors must be considered, such as: fit in the mold cavities; location of the inserts with respect to other dimensions; proper hole spacing to match with mold pins; and positioning inserts at room temperature into a heated mold
- Standard Dimensional Rubber Tolerances - DeltaFlex
There are four levels of dimensional tolerances that are used for molded rubber products The level selected should be based upon the need with the following guidelines “A1” | High Precision - This is the tightest tolerance classification and indicates a high precision rubber product
- Dimensional Tolerances Guide for Silicone Molded Parts
Considerations affecting dimensions and tolerances in the design stage include the process in part volume, reduced shrinkage from bonded inserts, shrinkage after cure, and fixed vs closure dimensions Some guidelines to acquire the right dimensional tolerances for silicone molded parts include the following: 1
- Rubber Molded Parts Mechanical Tolerances - Engineers Edge
The level selected should be based upon the need with the following guidelines “A1” is the tightest tolerance classification and indicates a high precision rubber product Such products require expensive molds, fewer cavities per mold, costly in-process controls and inspection procedures
- factors that affect tolerances in molded rubber products
Even after you receive the final rubber product in hand, there are still environmental conditions that can impact the tolerances Temperature plays a role in the fact that it can actually change the dimensions of the material by causing it to shrink or expand
|
|
|