|
- Restore WHS from external USB backup - social. microsoft. com
2 Install WHS on it while the data disks are disconnected (Do I need to follow the install reinstall sequence here???) 3 Get all the latest updates through Windows update 4 Restore my old system from USB backup but I have no idea how to this 5 Shutdown and reconnect the data disks 6 The system will wake up and begin re-configuring the
- Streaming TV on WHS - social. microsoft. com
However, WHS already has the ability to stream media (via Windows Media Connect 2 0) built in You might want to consider using other more capable systems for the actual recording, and use WHS for the serving
- WHS remote access not working - social. microsoft. com
Removed the xxxxxx homeserver com under remote access at WHS console, and imediately replaced it everything started working again 100% even got my iphone HP mediasmart client working
- WHS and Defragmentation dont mix - Even 3rd party
I had read the different threads here about defragmentation and that you shouldn't use the built in defrag tool with WHS, but that you should use a 3rd party tool instead So I tried Raxco PerfectDisk 8, which supports WHS (supposedly)
- Installing WHS 2011 on a 60gb SSD Drive - social. microsoft. com
Presto, WHS 2011 continues to install on my SSD and completes successfully Using a cfg ini answer file does indeed work for getting the WHS 2011 to ignore its default sys req's No need to use any imaging software to clone another drive and copy it to an SSD Just create a cfg ini answer file and install directly onto the SSD 1 beer for me!
- SMB Shares stop working, WHS server no longer visible on network
I doubt this is actually a WHS problem I believe this because I have had exactly the same symptoms with full-fledged Windows 2003 Server running on enterprise-grade hardware This condition is usually caused by either (1) a network problem (think router, switch) or (2) an Ethernet driver problem
- WHS RC1 on a bit smaller harddrive - social. microsoft. com
G'day Before I start I just want to say that I'm just buggering around with WHS for the moment just to see how it works ect, thus the reason I'm only using small hardrives ect After reading through a few posts I noticed that you need a minimum 65GB~ harddrive to install the RC1 (MS say 80GB) on but currently I only have an old IBM 61 4 GB hardrive So I'm just wondering if there is some way
- WHS data storage on external raid HDs only. . . ?
I assume that this arrangement would be 'seen' by WHS as if only a single data HD is present The load balancing between the external HD's would be handled by the Raid controller in the array cabinet
|
|
|